Bevel Back Weatherboards

Traditional and extremely versatile Bevel Back Weatherboards combine stability, durability and contemporary style that define today’s urban landscape. Strong shadow lines and various widths further enhance the usability of this classic range, which offer enduring style, prestige that comply with sound design and build principles.

JSC Timber also produces a full range of pre-primed, engineered and finger jointed profiles that complete the BevelClad range.

Residential and light Commercial cladding as per NZS 3604/E2AS1 direct and cavity fixing.

As per NZS 3617 or Branz Bulletin 411.  Refer JSC Profile Booklet for all available profiles.

Please note: Profiles are subject to change at any time without notice.

As per NZS 3631: 1988 : PC1 Premium Clears One  PC2 Premium Clears Two

As per NZS 3602 Class 2 durability for use above ground.

Band Sawn Face (BSF), Dressed Face (DF) or Sanded

Length Spread
Random length supply (up to 4.88) with selected lengths (up to 6.1) available on request.

Corner soakers and flat soakers to suit J61, J62, J63, J64 and J150 profiles.  All available in Stainless Steel and Copper with Powder Coated options available on request.

Nails - Silicone Bronze or Stainless Steel
Silicone Bronze or Stainless Steel fixings to NZBC E2/AS1 Table 24. JSC Rose Head/Pentagon Head/Flat Head Annular Groove Nails.  All nail fixings are to be pre-drilled a minimum of 1mm diameter smaller than the nail gauge. 

Refer to JSC Timber for Manufacturer details/correct sizes, fixing details and available options.   

Installation: Fixing Bevel Back Weatherboards
Ensure setout of weatherboards allows for 32mm lap with weathergrooves lined up.

Single face fix weatherboards to every fixing point, with nail driven in 35mm from bottom edge of weatherboard.  DO NOT PIN LAPS OF WEATHERBOARDS.  Nails to achieve a minium of 35mm embedment into the framing.

Random stagger end joints across adjacent boards and fix corrosive resistant soaker, butt end joints and external corners, nailed under lap.  Alternatively, use J124 and J123 cover boards to form external box corners.

In addition, all cut edges are to be sealed with suitable coating prior to installation and manufacturer's coating schedule adhered to.

Please contact specification@jsctimber.co.nz for a copy of our system documentation.

JSC DuraCedar

JSC specifically developed the 22mm thick weathboard and fascia range to increase the durability and stability of Western Red Cedar cladding.  JSC Timber recommends DuraCedar where dark stains are to be used. Read more about JSC DuraCedar

CedarShield - Factory Applied Coating Systems
JSC CedarShield ensures a consistent application for improved appearance and increased finish life and durability.  Read more about JSC CedarShield.

Please speak with a member of our Specification Team for information on weatherboard profile suitability for stains, dark colours and recommended coating options - ph: 09 412-2800 or specification@jsctimber.co.nz

Masterspec section 4221J Western Red Cedar Cladding

Smartspec: http://www.productspec.net/Smartspec




© 2008 JSC Timber  www.jsctimber.co.nz
Website Design by Labyrinth Solutions  |  Content Management by Contegro